11
SERVICE WORK ON THE CHASSIS
11.12
Installing the fork protector
11.13
Removing the lower triple clamp
–
Remove screws
101956-10
(SX‑F Factory Edition)
x
–
Position the fork protector on the right fork leg. Mount and tighten screws
Guideline
Remaining screws, chassis
101956-11
–
Position the fork protector on the left fork leg. Mount and tighten screws
Guideline
Remaining screws, chassis
–
Position the brake line, wiring harness, and clamp. Mount and tighten screws
101955-11
x
Preparatory work
–
Raise the motorcycle with the lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
–
Remove the start number plate. (
–
Remove the front fender. (
–
Remove the handlebar cushion.
Main work
–
Remove screw
–
Remove screw
–
Take off the top triple clamp with the handlebar and set it aside.
Info
Protect the motorcycle and its attachments against damage by covering
them.
Do not bend the cables and lines.
S00144-10
–
Remove O-ring
–
Take out the lower triple clamp with the steering stem.
–
Take out the upper steering head bearing.
S00145-10
3
on the right fork leg. Take off the fork protector.
(
p. 69)
x
(
p. 38)
x
p. 44)
p. 44)
1
.
2
.
3
. Remove protective ring
M6
10 Nm (7.4 lbf ft)
M6
10 Nm (7.4 lbf ft)
p. 36)
4
.
40
1
.
2
.
3
.