Removing The Start Number Plate; Installing The Start Number Plate; Removing The Front Fender; Main Work Remove Screws - KTM 450 SX-F Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.18

Removing the start number plate

11.19

Installing the start number plate

11.20

Removing the front fender

–
Remove screw
–
Remove screw
C00419-10
–
Position the start number plate. Mount and tighten screw

Guideline

Remaining screws, chassis
The holding lugs engage.
–
Position the brake line and clamp. Mount and tighten screw
C00418-10
Preparatory work
–
Remove the start number plate. (

Main work

–
Remove screws
C00420-10
1
and take off the clamp.
2
. Take off the start number plate.
p. 44)
1 2
and . Remove the front fender.
1 .
M6 10 Nm (7.4 lbf ft)
2
.
44