Removing The Fork Protector; Sx-F Eu, Sx-F Usa, Xc-F); Installing The Fork Protector - KTM 450 SX-F Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.9

Removing the fork protector

11.10

Installing the fork protector

11.11 Removing the fork protector
-
Position the brake caliper. Mount and tighten screws
Guideline
Screw, front brake caliper
-
Position the brake line and clamp. Mount and tighten screws
B00300-11
Finishing work
-
Install the front wheel.

(SX-F EU, SX-F USA, XC-F)

x
Preparatory work
-
Raise the motorcycle with the lift stand. (
-
Remove the front wheel.
-
Remove the fork legs.
Main work
-
Remove screws
-
Remove the screws on the right fork leg. Remove the fork protector from above.
B00306-10
(SX-F EU, SX-F USA, XC-F)
x
Main work
-
Position the fork protection on the left fork leg. Mount and tighten screws
Guideline
Remaining screws, chassis
-
Position the fork protection on the right fork leg. Mount and tighten the screws.
Guideline
Remaining screws, chassis
B00306-10
Finishing work
-
Install the fork legs.
-
Install the front wheel.
(SX-F Factory Edition)
x
-
Remove screws
-
Remove screws
101955-10
M8
( p. 69)
x
x ( p. 69)
( p. 38)
x
1 on the left fork leg. Remove the fork protector from above.
( p. 38)
x
x ( p. 69)
1
. Take off the clamp.
2
on the left fork leg. Take off the fork protector.
5
.
25 Nm Loctite
(18.4 lbf ft)
4
.
p. 36)
M6 10 Nm (7.4 lbf ft)
M6 10 Nm (7.4 lbf ft)
39
® 243™
1
.