Factory Start (Sx-F Factory Edition); Cold Start Button - KTM 450 SX-F Owner's Manual

6 CONTROLS
6.11 Factory Start (SX‑F Factory Edition)
6.12

Cold start button

The Factory Start
Possible states
• Factory Start is deactivated – The fork is in the normal operating mode.
A
•
Factory Start is activated – The fork is compressed and the front of the motor-
B
cycle is lowered.
By activating the Factory Start, the front of the motorcycle is lowered; this causes the
front wheel to rise up off the ground later during acceleration.
When the fork compresses for the first time, the Factory Start lock button is released
automatically. From this point on, the fork operates as if the Factory Start were deacti-
vated or not installed.
101959-10
The cold start button
When the engine is cold and outside temperatures are low, the injection system
extends the injection time. To combust the increased amount of fuel, the engine is
supplied with additional oxygen by pulling the cold start button.
Possible states
The cold start button is activated – The cold start button is pulled out all the way.
•
The cold start button is deactivated – The cold start button is pushed in all the
•
way.
C00488-10
1
is mounted on the right fork protector.
1
is fitted on the left on the throttle valve body.
14