10
TUNING THE CHASSIS
10.13
Adjusting the rebound damping of the fork
Info
The hydraulic rebound damping determines the fork suspension behavior.
(SX‑F EU, SX‑F USA)
–
Remove protection caps
–
Turn adjusting screws
–
Turn back counterclockwise by the number of clicks corresponding to the fork
type.
B00295-10
Guideline
Rebound damping (SX‑F EU)
Comfort
Standard
Sport
Rebound damping (SX‑F USA)
Comfort
Standard
Sport
–
Mount protection caps
(SX‑F Factory Edition, XC‑F)
–
Turn the red adjusting screw
–
Turn back counterclockwise by the number of clicks corresponding to the fork
C00407-11
type.
Guideline
Rebound damping (SX‑F Factory Edition)
Comfort
Standard
Sport
Rebound damping (XC‑F)
Comfort
Standard
Sport
1
.
2
clockwise all the way.
Info
Adjusting screws
2
are located at the bottom end of the fork legs.
Make the same adjustment on both fork legs.
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.
1
.
3
all the way clockwise.
Info
3
Adjusting screw
is located at the upper end of the right fork leg.
The rebound damping is located in the right fork leg (red adjusting
screw). The compression damping is located in the left fork leg (white
adjusting screw).
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.
14 clicks
12 clicks
10 clicks
14 clicks
12 clicks
10 clicks
17 clicks
15 clicks
13 clicks
15 clicks
13 clicks
11 clicks
34