Changing The Parking Light Bulb - KTM 690 Duke Owner's Manual

14 ELECTRICAL SYSTEM
14.10

Changing the parking light bulb

Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the headlight mask with the headlight. (
Main work
–
Pull cable sleeve
–
Remove the bulb.
–
Position a new light bulb in the socket.
Parking light (W5W / socket W2.1x9.5d) (
–
Carefully position socket
–
Mount cable sleeve
B00975-10
Finishing work
–
Refit the headlight mask with the headlight. (
–
Check the headlight setting. (

and the socket of parking light

with the bulb in the housing.

.
p. 121)
p. 115)

carefully out of the housing.
p. 161)
p. 116)
119