13
WHEELS, TIRES
Main work
–
Check the rear hub rubber dampers.
–
Check the wheel bearing for damage and wear.
»
If the wheel bearing is damaged or worn:
–
Replace the wheel bearing.
–
Remove bushing
shaft seal rings.
Long-life grease (
–
Install the bushing.
–
Clean and grease the thread of the wheel spindle and nut.
602566-10
Long-life grease (
–
Clean the fixing locations on the brake caliper support and swingarm.
(
p. 100)
. Clean and grease the mating surfaces of the bushings and the
p. 169)
p. 169)
98