13
WHEELS, TIRES
–
Position wheel speed sensor
Guideline
Remaining screws, chassis
–
Position the brake caliper.
The brake linings are correctly positioned.
–
Position spacers
–
Operate the hand brake lever repeatedly until the brake linings are in contact with the
brake disc and there is a pressure point. Fix the hand brake lever in the activated posi-
602545-11
tion.
The brake calipers straighten.
–
Tighten screws
Guideline
Screw, front brake caliper
–
Remove the fixation of the hand brake lever.
–
Take the motorcycle off of the front wheel stand. (
–
Take the motorcycle off of the rear wheel stand. (
–
Pull the front brake and compress the fork forcefully a few times.
The fork legs straighten.
–
Tighten screws
Guideline
Screw, fork stub
602546-11
in the drill hole. Mount and tighten screw
. Mount screws
but do not tighten yet.
.
M10x1.25
.
M6
10 Nm (7.4 lbf ft)
Loctite
45 Nm
(33.2 lbf ft)
p. 70)
p. 68)
M8
15 Nm
(11.1 lbf ft)
95
.
®
243™