Filling/Bleeding The Cooling System - KTM 690 Duke Owner's Manual

15 COOLING SYSTEM
15.5

Filling/bleeding the cooling system

Warning
Danger of poisoning Coolant is poisonous and a health hazard.
–
Coolant must not come into contact with the skin, eyes, or clothing. If contact occurs with the eyes, rinse with water immedi-
ately and contact a physician. Immediately clean contaminated areas on the skin with soap and water. If coolant is swallowed,
contact a physician immediately. Change clothing that is contaminated with coolant. Keep coolant out of reach of children.
–
Remove radiator cap
M00682-10
–
Remove bleeder screw
–
Tilt the vehicle slightly to the right.
–
Pour in coolant until it emerges without bubbles at the vent hole, and then mount and
tighten bleeder screw
Coolant (
–
Fill the radiator completely with coolant. Mount radiator cap
–
Lean the vehicle on the side stand.
–
Check the coolant level in the compensating tank. (
B00985-10

.
 .

immediately.
p. 166)

.
p. 125)
128