16
TUNING THE ENGINE
16.1
Setting the engine characteristics
Preparatory work
–
Switch off the ignition by turning the ignition key to the position
–
Remove the passenger seat. (
Main work
–
Pull off the Map‑Select switch with holder
–
Pull the Map‑Select switch out of the holder.
M00683-10
–
Turn the adjusting wheel until the desired number is aligned with marking
Set the Map‑Select switch to Soft.
–
Set the adjusting wheel to position 1.
Soft – Homologated performance with very gentle response
Set the Map‑Select switch to Advanced.
–
Set the adjusting wheel to position 2.
Advanced – Homologated performance with very direct response
Set the Map‑Select switch to Standard.
–
Set the adjusting wheel to position 3, 4, 5, 6, 7, 8, 9 or 0.
M00684-10
Standard – Homologated performance with balanced response
–
Position the Map‑Select switch in the holder.
–
Push the Map‑Select switch with the holder into the retaining bracket.
p. 70)
from the retaining bracket.
130
.
.