Installing The Front Fender; Removing The Tank Cover - KTM 1050 Adventure Owner's Manual

13 SERVICE WORK ON THE CHASSIS
13.23

Installing the front fender

13.24

Removing the tank cover

–
Position the fender.
Info
Pay attention to where the brake lines are placed.
–
Mount and tighten screws
Guideline
Screw, fender
K00024-10
–
Insert the brake lines in the brackets
Preparatory work
–
Remove the seat. (
–
Remove the front side cover. (
Main work
–
Remove screw
–
Remove screw
M00902-10

.

and close the holder.
p. 97)
p. 109)

.

.
M5x12 3.5 Nm
(2.58 lbf ft)
117