15
WHEELS, TIRES
15.5
Checking the rear hub rubber dampers
Info
The engine power is transmitted from the rear sprocket to the rear wheel via 6 rubber dampers. The rubber dampers wear out dur-
ing operation. If the rubber dampers are not changed in time, the rear sprocket carrier and the rear hub will be damaged.
–
Position the wheel speed sensor
–
Mount and tighten screw
Guideline
Remaining chassis screws
–
Operate the foot brake lever repeatedly until the brake linings are in contact with the
brake disc and there is a pressure point.
M00917-11
Finishing work
–
Remove the rear of the motorcycle from the lifting gear. (
Preparatory work
–
Lift the motorcycle with the rear lifting gear. (
–
Remove the rear wheel.
in the drill hole.
.
M6
p. 92)
(
p. 137)
142
10 Nm (7.4 lbf ft)
p. 92)