Table of Contents
Advertisement
15
WHEELS, TIRES
Warning
Danger of accidents No braking effect when operating the rear brake.
–
After installing the rear wheel, always operate the foot brake until the pressure point is reached.
Main work
–
Check the rear hub rubber dampers.
–
Check the wheel bearing for damage and wear.
»
If the wheel bearing is damaged or worn:
–
Change the wheel bearing.
–
Clean and grease the shaft seal rings
Long-life grease (
–
Clean and grease the wheel spindle as well as its thread and nut.
Long-life grease (
M00934-10
–
Make sure that the rubber dampers and the rear sprocket carrier are correctly posi-
tioned.
–
Position the seal ring
–
Insert the spacer
–
Place the rear wheel in the swingarm and bring the brake disc into contact with the
brake caliper.
M00935-10
(
p. 142)
and mating surfaces
p. 209)
p. 209)
and insert the spacer
on the right in the direction of travel.
of the spacers.
on the left in the direction of travel.
140
Advertisement
Table of Contents
