Omron SYSDRIVE 3G3JV User Manual page 37

Design
Symbol
Output
MA Multi-function contact
output (Normally open)
MB Multi-function contact
output (Normally closed)
MC Multi-function contact
output common
AM Analog monitor output
AC Analog monitor output
common
Note 1. Depending on the parameter settings, various functions can be selected for multi-function in-
puts and multi-function contacts outputs.
Note 2. Functions in parentheses are default settings.
H Selecting Input Method
• Switches SW7 and SW8, both of which are located above the control circuit terminals, are used for
input method selection.
Remove the front cover and optional cover to use these switches.
2-12
Name
Set by parameter n40
( (during running)
Common for MA and
MB use
Set by parameter n44
(Output frequency)
Common for AM use
Function
Relay output
g g) 1 A max. at 30 V DC
1 A max. at 250 V AC
2 mA max. at 0 to 10 V DC
Selector
Control circuit terminal
block
Chapter 2
Signal level
30 C