Table of Contents
Advertisement
0° ~ 360°
Mounting the IP VF bullet camera
To mount the IP VF bullet camera on a wall:
1.
Attach the drill template (supplied) to the wall where the
camera is to be mounted. Drill screw holes in the wall
according to the number one holes of the drill template.
2.
If you need to route cables through the wall (or ceiling),
cut a cable hole according to the drill template. Skip this
step, if you want to route the cables on the surface of the
ceiling.
3.
Secure the camera to the wall (or ceiling) with expansion
screws.
22
0°~90°
0° ~ 360°
Installation Guide
Advertisement
Table of Contents
