Table of Contents
Advertisement
To mount the IP bullet camera with a back box
1.
Place the drill template (supplied) on the wall where the
camera is to be mounted. Drill holes in the wall according
to the number of holes in the drill template.
2.
If you need to route cables through the wall (or ceiling),
cut a cable hole according to the drill template. Skip this
step, if you want to route the cables on the surface of the
wall or ceiling.
3.
Secure the back box to the wall with expansion screws.
4.
Route the cables of the camera.
5.
Hook the camera to the back box with the safety cable.
6.
Secure the camera to the back box with screws.
Mounting the IP VF dome camera
To mount the IP VF dome camera on a ceiling or wall:
1.
Loosen the three screws on the edge of the lower dome
with a screwdriver.
Installation Guide
27
Advertisement
Table of Contents
