Teledyne Linea GigE 2K User Manual page 87

Display Name
Device UPnP Auto-Discovery
Mode
Off
Active
Payload Size
Stream Channel Selector
Device Link Speed
PacketSize
Interpacket Delay
Packet Resend Buffer Size
IP Configuration Status
None
PersistentIP
DHCP
LLA
ForceIP
Current IP Address
Current Subnet Mask
Current Default Gateway
Current IP set in LLA
Current IP set in DHCP
Current IP set in Persistent
IP
Linea GigE Series Camera
Feature & Values
deviceUPnPDiscoveryMode
PayloadSize
GevStreamChannelSelector
GevLinkSpeed
GevSCPSPacketSize
GevSCPD
devicePacketResendBufferSize
GevIPConfigurationStatus
GevCurrentIPAddress
GevCurrentSubnetMask
GevCurrentDefaultGateway
GevCurrentIPConfigurationLLA
GevCurrentIPConfigurationDHCP
GevCurrentIPConfigurationPersistentIP
Description
Controls the operation mode for the UPnP
Discovery function.
Off UPNP Device will not broadcast its
existence on the network and is not visible
in the Windows network neighborhood.
Active UPNP Device will broadcast its existence
on the network and is visible in the
Windows network neighborhood.
Provides the number of bytes transferred
for each image or chunk on the stream
channel. (RO)
Selects the stream channel to control.
Indicates the transmission speed
negotiated by the given network interface.
(in Mbps) (RO)
Specifies the stream packet size in bytes
to send on this channel.
Indicates the delay (in µs) to insert
between each packet for this stream
channel.
Indicates the amount of memory to
reserve in MBytes for the packet resend
buffer
Reports the current IP configuration
status. (RO)
None Device IP Configuration is not defined.
PersistentIP Device IP Address Configuration is set to
Persistent IP (static).
DHCP Device IP Address Configuration is set to
DHCP (Dynamic Host Configuration
Protocol). Network requires a DHCP
server.
LLA Device IP Address Configuration is set to
LLA (Link-Local Address). Also known as
Auto-IP. Used for unmanaged networks
including direct connections from a device
to a dedicated NIC.
ForceIP Device IP Address Configuration is set to
ForceIP. Used to force an IP address
change.
Reports the IP address for the given
network interface. (RO)
Reports the subnet mask of the given
interface. (RO)
Reports the default gateway IP address to
be used on the given network interface.
(RO)
Controls whether the LLA (Link Local
Address) IP configuration scheme is
activated on the given network interface.
(RO)
Controls whether the DHCP IP
configuration scheme (Dynamic Host
Configuration Protocol) is activated on the
given network interface.
Controls whether the PersistentIP
configuration scheme is activated on the
given network interface.
Device Version
& View
1.00
Beginner
1.00
Beginner
1.00
Expert
1.00
Expert
1.00
Expert
1.00
Expert
1.00
DFNC
Guru
1.00
Guru
1.00
Beginner
1.00
Beginner
1.00
Beginner
1.00
Guru
1.00
Guru
1.00
Guru
Operational Reference • 85