Gige Server Verification; Gige Server Status - Teledyne Linea GigE 2K User Manual

Monochrome cmos line scan
Hide thumbs Also See for Linea GigE 2K:
Table of Contents

Advertisement

GigE Server Verification

After a successful Sapera GigE Vision package installation, the GigE Server icon is visible in the
desktop taskbar tray area (note that in Windows 7 the icon remains hidden until a camera is
connected). After connecting a camera (see following section), allow a few seconds for the GigE
Server status to update. The Linea GigE camera must be on the same subnet as the NIC to be
recognized by the GigE Server.
GigE Server
Tray Icon:
The normal GigE server tray
icon when the camera device is
found. It will take a few
seconds for the GigE Server to
refresh its state after the
camera has obtained an IP
address.
If you place your mouse cursor on this icon, the GigE Server will display the number of GigE Vision
devices found by your PC. Right click the icon and select status to view information about those
devices. See "Running the Network Configuration Tool" on page 21 and "Troubleshooting" on page
124for more information.

GigE Server Status

Once the Linea GigE is assigned an IP address (its Status LED is steady blue) the GigE server tray
icon will not have a red X through it, indicating that the device was found. It might take a few
seconds for the GigE Server to refresh its state after the camera has obtained an IP address.
Right-click the GigE Server tray icon to open the following menu.
Click on Show Status to open a window listing all devices connected to the host system. Each GigE
device is listed by name along with important information such as the assigned IP address and
device MAC address. The screen shot below shows a connected Linea GigE with no networking
problems.
20 • Using Linea GigE with the Sapera API
Device Available
Device IP Error
The GigE server tray icon
shows a warning when a
device is connected but there
is some type of IP error.
Device Not Available
A red X will remain over the
GigE server tray icon when the
camera device is not found.
This indicates a major network
issue. Or in the simplest
case, there is no camera
connected.
Linea GigE Series Camera

Advertisement

Table of Contents
loading

This manual is also suitable for:

Linea gige 4kLinea gige 8k

Table of Contents