•
The host computer also has independent control of the host transfer module which allows the
host application to optimize receiving image packets along with other tasks running on the
host.
Important: Under user controlled transfers, the feature TransferOperationMode sets the transfer
•
as either Continuous or a specific image frame count (MultiBlock). The transfer frame count is
set by the feature TransferBlockCount, which must be equal or less than the number of image
frames available in the camera's circular frame buffer (else the command is rejected). The
feature transferQueueCurrentBlockCount is used to read the available buffer count before
starting a block count transfer.
Acquisition
Camera
Linea GigE Series Camera
Circular Frame Buffer
FB 1
Write
FB 2
Index
FB 3
FB 4
FB 5
FB 6
:
FB n
Transfer
Read
Index
Camera Transfer
Module
Host
Computer
Transfer
Module
Operational Reference • 77