Network Menu - Panasonic PT-ST10EA Operating Instructions Manual

Menu operation (continued)
CONTROL DEVICE SETUP
You can enable/disable the button operations of the
control panel and remote control.
Change setting
CONTROL PANEL
ENABLE Enable the button operations
DISABLE Disable the button operations
REMOTE CONTROLLER
ENABLE Enable the button operations
DISABLE Disable the button operations
NOTE:
If DISABLE is selected and [ENTER] is pressed, the
[ENTER].
If any button is pressed after CONTROL PANEL is set
to DISABLE, the password screen appears. Input the
password which is set in the SECURITY menu. (If no
operation is done, the password screen disappears in 10
seconds.)
If you set both CONTROL PANEL and REMOTE
CONTROLLER to DISABLE, all buttons' operations of
the control panel and remote control are disabled and you
cannot turn off the power.
How to clear DISABLE:
During the standby mode or projection, press and
hold [ENTER] and [MENU] for at least 2 seconds, and
CONTROL PANEL is set to ENABLE.
Change the setting of REMOTE CONTROLLER with the
control panel.
44 ENGLISH
Change setting
Set the selected item with [
NOTE:
WIRED LAN
OK and press
You can set up a wired LAN.
NAME CHANGE
You can change the name of the projector.
NETWORK CONTROL
When controlling the projector with a computer on the
network, you must turn this function ON.
STATUS
You can display the status of the network setting.
INITIALIZE
You can reset the settings of the network to the factory
default settings.
NOTE:

NETWORK MENU

Remote control
MENU MENU RETURN
ENTER ENTER
AV
FREEZE MUTE
COMPUTER
VIDEO
DEFAULT DEFAULT FUNCTION
INDEX- WIN.
These items are set for network connection with a
computer. For details of the PJ Link and network, see
"Network Operation Manual".
If PASSWORD (SECURITY menu) is activated, when the
network setting is initialized, you will be required to input the
password.
Control panel
INPUT
SELECT
STANDBY ( R )
ON ( G )
ENTER ENTER
LAMP
TEMP MENU MENU FUNCTION
].