Table of Contents
Advertisement
Remote control operation
FREEZE
COMPUTER
DEFAULT FUNCTION
DIGITAL ZOOM
CAPTURE AN IMAGE
You can freeze the projected image and temporarily
stop the sound, regardless of the playing condition of
the connected device.
FREEZE
Press the button again to cancel it.
The image is distorted momentarily
when the projection is stopped and
restarted.
STOP THE PROJECTION
TEMPORARILY
You can temporarily stop the projection and the sound
from the projector.
AV
Press the button again to cancel it.
MUTE
SWITCH THE INPUT SIGNAL
You can switch the input signal to be projected.
COMPUTER
COMPUTER
The options below are displayed
each time you press this button.
COMPUTER1 Signal input to COMPUTER1 IN
terminal
COMPUTER2 Signal input to COMPUTER2 IN
terminal
VIDEO
The options below are displayed each
VIDEO
time you press this button.
S-VIDEO
Signal input to S-VIDEO IN terminal
VIDEO
Signal input to VIDEO IN terminal
AUTO
SETUP
AV
MUTE
VIDEO
INDEX-
WIN.
VOLUME
graphical input terminal guide on the upper right of the
screen), if INPUT GUIDE (DISPLAY OPTION
ON-SCREEN DISPLAY menu) is set to DETAILED.
(
page 35)
You can change the input with [
It may take some time to change the image after the
input signal is switched.
NOTE:
Input a compatible signal shown in the "LIST OF
COMPATIBLE SIGNALS". (
For the input terminals, see "Connections". (
The input guide automatically disappears when it is left
idle.
Press [INPUT SELECT] on the control panel to switch the
input in the following order. (
COMPUTER1
COMPUTER2
VIDEO
S-VIDEO
SET UP THE IMAGE POSITION
AUTOMATICALLY
The projector automatically adjusts the SHIFT, DOT
CLOCK and CLOCK PHASE when an RGB signal is
input.
AUTO
SETUP
Screen
Projected image
NOTE:
The SIGNAL SEARCH will be in operation when it is set to
ON. (
page 37)
If the dot clock frequency is higher than 162 MHz,
CLOCK
CLOCK PHASE
and
automatically. (
page 32, 33)
If the projected signal or image is too dark or blurred around
the edge, AUTO SETUP may stop the process before
completing the adjustment or adjust abnormally. Project a
much clearer or lighter image and try again.
].
page 52)
page 18)
page 13)
DOT
can not be adjusted
ENGLISH
25
Advertisement
Table of Contents
