Table of Contents
Advertisement
Details of your projector (continued)
PROJECTOR'S REMOTE CONTROL
Top and rear view
Remote control
signal emitters
Front view
MENU
ENTER
FREEZE
COMPUTER
DEFAULT FUNCTION
DIGITAL ZOOM
NOTE:
Do not drop the remote control.
Avoid contact with liquids or moisture.
Do not attempt to modify or disassemble the remote control.
Do not let strong light shine onto the signal receptor which will cause a malfunction.
The remote control operates within the range of 7 m (23' 0"), approximately ±30 ° vertically and horizontally from the projector
avoiding any obstacles.
The operating range may differ due to the screen material and may not be effective with a translucent screen.
Installing/removing batteries
Press the tab and lift up the
cover.
Use only manganese batteries.
AUTO
SETUP
RETURN
AV
MUTE
VIDEO
INDEX-
WIN.
VOLUME
Insert the batteries according to the
polarity diagram indicated inside or
remove.
POWER
Switch between standby mode and projection
mode. (
page 22, 23)
Display the Main menu. (
Navigate through the menus with [
Capture the projected image as a frozen picture.
(
page 25)
Switch the required input signal button to select.
(
page 25)
Reset some of the settings to the factory default
settings. (
page 26)
Control the zoom size. (
Control speaker volume. (
Create shortcut assigned to certain selected
function. (
page 27, 40)
Display frozen image while the display of
subsequent images continues. (
Turn off the projection temporarily. (
Detect the input signal.
Adjust the settings of SHIFT, DOT CLOCK
and CLOCK PHASE in the POSITION menu
automatically for COMPUTER signals. (
page 29)
] and
[ENTER]. (
page 28)
page 27)
page 26)
page 26)
page 25)
page 25)
ENGLISH
15
Advertisement
Table of Contents
