Table of Contents
Advertisement
Turn the projector ON or OFF (continued)
POWER INDICATOR
STANDBY
(
R
)
ON
(
G
)
POWER indicator
POWER indicator status
Indicator status
Red
Green
Orange
NOTE:
When the power is turned off, the internal fan cools the lamp using internal power supply.
The power is turned on again while cooling the lamp and recovers to the projection mode. Recovery may take a while.
While the power is turned off (when STANDBY MODE is set to ECO, the POWER indicator is lit red), power of about 0.4 W is
consumed.
INPU
SELEC
ENTER
No power is supplied and the internal cooling fan is not operating.
The power is turned off (when STANDBY MODE is set to ECO).
Lit
If [POWER] button is pressed, projection starts.
The power is turned off (when STANDBY MODE is set to
NORMAL).
Flashing
If [POWER] button is pressed, projection starts.
Flashing
The power is on and preparing for projection.
Lit
The projector is projecting.
No power supply and the power is preparing for being turned off.
Lit
It is turned off (The projection is set in STANDBY MODE) after a
while.
The power is switched on again while cooling the lamp and
Flashing
recovering to the projection mode. Recovery may take a while.
POWER indicator
When the TEMP
lights red and you cannot turn the projector on.
Status
POWER indicator
ENGLISH
21
Advertisement
Table of Contents
