Table of Contents
Advertisement
Turn the projector ON or OFF (continued)
TURN THE PROJECTOR ON
Before switching on the projector, make sure all the other devices are correctly connected and remove the Lens
cover. (
page 18)
1
Connect the power cord. (
After a while the "power indicator" lights or
2
Press the POWER button.
POWER
before it lights up and the STARTUP LOGO is
displayed. See STARTUP LOGO in DISPLAY
OPTION menu. (
22
ENGLISH
STANDBY
(
R
)
ON
(
G
)
POWER indicator
page 20)
page 36)
2 )
NOTE:
CONTROL PANEL (when operating with
the projector body) or REMOTE CONTROLLER (when
operating with the remote control) under CONTROL
DEVICE SETUP in the SECURITY menu is set to ENABLE.
(
page 44)
When setting the SECURITY menu, you will be asked to
input the password. (
page 42)
When starting up the projector, some small rattling or
tinkling sound may be heard. These are normal and will not
affect the performance of the projector.
When the internal cooling fan is operating, some operational
sound may be heard. The loudness of the operational
sound depends on the external temperature.
If INITIAL START UP (PROJECTOR SETUP menu) is set
to ON, the projector starts projecting when the power cord is
connected to a wall outlet. (
If the projector is turned on again while the internal cooling
fan is still operating by the internal power supply, the display
normal and will not affect the performance of the projector.
page 39)
Advertisement
Table of Contents
