Speed/S1 Display Mode (Stop Watch 1); Speed/S2 Display Mode (Stop Watch 2) - KTM 530 EXC Owner's Manual

CONTROLS

SPEED/S1 display mode (stop watch 1)

5.27

SPEED/S2 display mode (stop watch 2)

5.28
Table of functions
Display Press the button
SPEED/H display mode
No function
(service hours)
SPEED/CLK display mode No function
(time)
SPEED/LAP display mode Starts or stops the
(lap time) clock.
SPEED/ODO display mode No function
(odometer)
SPEED/TR1 display mode No function
(trip master 1)
SPEED/TR2 display mode Increases value TR2.
(trip master 2)
SPEED/A1 display mode No function
(average speed 1)
SPEED/A2 display mode No function
(average speed 2)
SPEED/S1 display mode No function
(stop watch 1)
SPEED/S2 display mode Starts or stops S2.
(stop watch 2)
Table of conditions and activability
Display
SPEED/H display mode (service hours)
–
Press the button
display.
S1 (stop watch 1) shows the trip time on the basis of TR1 and continues running when
an impulse is received from the wheel speed sensor.
The calculation of this value starts with the first impulse of the wheel speed sensor and
ends three seconds after the last impulse.
Press the button
Press the button
400327-01
Press the button
for 3 - 5 seconds.
Press the button
briefly.
–
Press the button
display.
S2 (stop watch 2) is a manual stop watch.
If S2 is running in the background, the S2 display flashes in the speedometer display.
Press the button
Press the button
Press the button
for 3 - 5 seconds.
400328-01
Press the button
briefly.
. Press the button
No function
No function
Stops the current lap
time and saves it, and
the stop watch starts
the next lap.
No function
No function
Decreases value TR2.
No function
No function
No function
No function
briefly and repeatedly until S1 appears at the top right of the
. No function
. No function
The TR1, A1 and S1 displays are reset to 0.0.
next display mode
briefly and repeatedly until S2 appears at the top right of the
. Starts or stops S2.
. No function
The S2 and A2 displays are reset to 0.0.
next display mode
. Press the button
5 seconds.
The display changes to
the Setup menu of the
speedometer functions.
The display changes to
the Setup menu of the
clock.
The stop watch and the
lap time are reset.
–
The TR1, A1 and S1 dis-
plays are reset to 0.0.
Clears value TR2.
The TR1, A1 and S1 dis-
plays are reset to 0.0.
–
The TR1, A1 and S1 dis-
plays are reset to 0.0.
The S2 and A2 displays
are reset to 0.0.
Vehicle at a stand-
still
for 3 - Press the button
briefly.
next display mode
next display mode
next display mode
next display mode
next display mode
next display mode
next display mode
next display mode
next display mode
next display mode
Menu can be acti-
vated
•
21