Installing The Fork Legs; Removing The Fork Protector; Installing The Fork Protector - KTM 530 EXC Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Installing the fork legs

x
9.26

Removing the fork protector

9.27

Installing the fork protector

9.28
–
Position the fork legs.
Info
The topmost sunk nut in the fork leg must be flush to the upper edge of the
upper triple clamp.
Position the bleeder screw
100021-10
–
Fully tighten screw
Guideline
Screw, top triple clamp
–
Fully tighten screw
Guideline
Screw, bottom triple clamp
500094-11
–
Position brake caliper, mount and tighten screws
Guideline
Screw, front brake caliper
–
Mount cable clip
–
Position the brake line and cable harness. Put the clamp on, mount and tighten
screws .

–
Install the front wheel.
500093-11
x
–
Remove the fork legs. (
–
Remove screws
–
Remove the screws on the right fork leg. Remove the fork protector upwards.
500105-10
x
–
Position the fork protection on the left fork leg. Mount and tighten screws
Guideline
Remaining screws, chassis
–
Position the fork protection on the right fork leg. Mount and tighten the screws.
Guideline
Remaining screws, chassis
–
Install the fork legs.
500105-10
to the front.

.

M8
.

M8
M8
.

( p. 60)
x
p. 42)
on the left fork leg. Remove the fork protector upwards.

M6
M6
( p. 43)
x
17 Nm
(12.5 lbf ft)
12 Nm (8.9 lbf ft)
.

25 Nm Loctite ® 243™
(18.4 lbf ft)

10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
43
.