Cleaning Setting - Panasonic NN-CS894B Operating Instructions Manual

Cleaning Setting

52. System Cleaning Setting:
The first stage of this program cleans the system with a citric acid solution. The second stage runs water through the system to
rinse the pipes.
1. Make a solution of
16 g citric acid and
200 g of water, add
the solution to the
water tank. Ensure
drip tray is empty.
6. Touch once.
Notes:
1. When " " appears in the display, run the 'system cleaning' program.
2. If the system cleaning program is not used regularly, the pipe will get blocked and the steaming performance will be less
effective.
3. Do not remove the drip tray during the drain program. If the drip tray is removed during the program, U12 is displayed and
the program will stop.
4. Empty the drip tray and rinse with running tap water after the program has finished.
53. Cavity Cleaning Setting:
This feature is available when the cavity is built up with fat or grease (20 minutes is needed).
1. Touch once.
Notes:
1. Full the tank with water before using.
2. After cleaning, open the door and wipe with a damp cloth.
IP4965_3BH70HP_Eng_30_140703.indd 48 IP4965_3BH70HP_Eng_30_140703.indd 48
2. Touch once.
Touch Start. The program will
run for approx. 1 minute. Empty
the drip tray after the program
has finished.
2. Select "Cavity cleaning".
Tap "+"/"-" or swipe the slider bar until "cavity
cleaning" appears in the display window.
3. Select "System cleaning".
Tap "+"/"-" or swipe the slider
bar until "system cleaning"
appears in the Display Window.
After the program has
paused, empty the drip
tray and fill the steam tank
with water (to max level).
- Eng-48 -
(continued)
4. Touch once.
Touch the Set key to verify
the selection.
5. Touch once.
The cooking time appears
in the display window and
begins to count down.
The program will run for
approx. 29 minutes.
3. Touch once.
Touch the Set key to verify the
selection.
4. Touch once.
The cooking time appears in the
display window and begins to
count down.
2014-7-3 15:39:31 2014-7-3 15:39:31