Crestron TST-600 Configuration Manual page 12

5.7" Wireless Touch Screen
8 • 5.7" Wireless Touch Screen: TST-600
The TST-600 ships with DHCP enabled by default. To enter static IP settings, touch
LAN Setup to display the "Ethernet Setup" menu.
"Ethernet Setup" Menu
From the "Ethernet Setup" menu, touch Set Static IP Address Settings to display
the "Ethernet Setup – Static IPs" menu.
"Ethernet Setup – Static IPs" Menu
The "Ethernet Setup – Static IPs" menu is used to edit Static IP address, Static
Subnet Mask, Static Default Router, Preferred DNS, and Alternate Preferred DNS
settings. Touch each to display a keypad for entering the new setting.
Touch Reboot Required to Apply IP Changes to save the new settings and reboot
the TST-600.
Crestron TST-600
Configuration Guide – DOC. 7383D