Crestron TST-600 Configuration Manual page 8

5.7" Wireless Touch Screen
4 • 5.7" Wireless Touch Screen: TST-600
"RF Setup" (Acquire in progress) Screen
When the process is complete, the screen displays an Acquire OK message.
3.
Press ACQUIRE on the gateway to exist Acquire mode. The LED turns
off.
"RF Setup" (Acquire OK) Screen
NOTE: Select an RF channel between 12 and 23 for maximum range. Channels 11,
24-26 will result in less range but are available if RF interference requires moving
the RF channel.
NOTE: The RF ID of the unit must match the RF ID specified in the SIMPL
Windows program.
For details, refer to "Appendix A: The RF Spectrum" on page 15 and "Appendix B:
Optimum RF Reception Guidelines" on page 16.
From any of the setup menus, touch
Crestron TST-600
to go back to the previous menu.
Configuration Guide – DOC. 7383D