Configure The Touch Screen; Ethernet Setup - Crestron TSW-730 Configuration Manual

Crestron TSW-730

Configure the Touch Screen

Configuration Guide – DOC. 7414B

Ethernet Setup

On the "Setup" menu, touch Ethernet Setup to display the "Ethernet Setup" menu.
"Ethernet Setup" Menu
The "Ethernet Setup" menu displays the touch screen's Mac Address and IP Address,
Subnet Mask, Def Router, Primary DNS, Secondary DNS, Hostname and Domain.
There are controls for turning DHCP On or Off as well as a Set Static IP Address
Settings button, which provides access to controls which allow editing of these
settings. This screen also contains a Link indicator to show the status of the Ethernet
connection.
Touch Set Static IP Address Settings to display the "Ethernet Setup – Static IPs"
screen.
"Ethernet Setup – Static IPs" Screen
To edit the Static IP Address, Static Subnet Mask, Static Default Router, Preferred
DNS or Alternate Preferred DNS, touch the button directly under the label for the
entry to edit. The on-screen numeric keypad opens.
7" Room Scheduling Touch Screen
7" Room Scheduling Touch Screen: TSW-730 • 3