Hood Release - Chevrolet 2010 Express Owner's Manual

Hood Release

To open the hood:
2. Then go to the front of the vehicle and lift up
the secondary hood release, which is located
underneath the middle of the hood.
1. Pull the handle with
this symbol on it. It is
located in front of
the driver's side door
frame near the floor.
3. Lift the hood, release the hood prop from its
retainer and put the hood prop into the slot in
the hood.
If your vehicle has an underhood lamp, it will
automatically come on and stay on until the hood
is closed.
Before closing the hood, be sure all of the filler caps are
on properly. Then lift the hood to relieve pressure on the
hood prop. Remove the hood prop from the slot in the
hood and return the prop to its retainer. Let the hood
down and close it firmly.
6-13