Hood Release - Chevrolet Malibu Hybrid 2008 Owner's Manual

Table of Contents

Advertisement

Hood Release

To open the hood, do the following:
1. Pull the hood release
handle with this symbol
on it. It is located
inside the vehicle to
the left of the steering
column.
2. Then go to the front of the vehicle and push the
secondary hood release handle toward the driver's
side of the vehicle.
3. Lift the hood.
4. Release the hood prop rod from its retainer and put
the hood prop into the slot marked with an arrow.
Before closing the hood, be sure all the filler caps are
on properly. Then lift the hood to relieve pressure
on the hood prop. Remove the hood prop from the
slot in the hood and return the prop to its retainer.
Lower the hood 8 to 12 inches (20 to 30 cm) above
the vehicle and release it to latch fully. Check to make
sure the hood is closed and repeat the procedure
if necessary.
5-11

Advertisement

Table of Contents
loading

Table of Contents