Setting The Author Id And Work Type - Olympus DS DS-3400 Instructions Manual

Setting the Author ID and Work Type

Every file recorded on the recorder will include
the Author ID and Work Type as part of its
header information. To create multiple Author
IDs and Work Types on the recorder, use the
bundled DSS Player software to create and
upload a Data list (list of Author IDs and Work
Types) to the recorder. For more details, refer
to the Online help for DSS Player (☞ P.63).
By default the Author ID is set to "DS3400".
PLAY/OK
F1,F2,F3
button
+ –
PLAY/OK, , ,
9, 0
button
Setting an Author ID
1
Turn ON the recorder.
When [Prompt for author ID at Power-on.] has
been set through DSS Player ( ☞P. 59), the
registered Author ID List will appear.
+
–
2
Press the or
Author ID that you want to assign to the
recorder from the ID list.
Author ID
AUTHOR A
AUTHOR B
AUTHOR C
AUTHOR D
AUTHOR E
AUTHOR F
EXIT
Press the PLAY/OK button to set the ID.
3
When more than one Author ID exist on the
recorder, the ID list will be displayed.
Note
• Up to 10 Author ID entries can be registered (up to a
maximum of 16 characters).
button to select the
Author List
ID 1
ID 2
ID 3
ID10
3
43