Power Supply; Power Save Mode (Power Save) - Olympus DS DS-3400 Instructions Manual

Power Supply

When the recorder is not being used, turn the
power off to reduce battery consumption to a
minimum. Even if the power is turned off, existing
data, mode settings, and clock settings will be
maintained.
1
Turning On the Power
While the recorder's power is off, slide the
POWER/HOLD switch in the direction
indicated by the arrow.
The display will turn on, and after [System Check]
appears, the power will be turned on. The resume
function will bring the recorder back to the stop
position in memory before power was turned off.
Turning Off the Power
Slide the POWER/HOLD switch in the
direction indicated by the arrow for 0.5
seconds or longer.
The display shuts off and the power will be turned
off. The resume function remembers the stop position
before the power is turned off.
14
Power Save Mode
(Power Save)
When the recorder is ON but not in use for 10
minutes, by default, it will switch to power save
mode automatically. To reactivate the recorder
again, operate any button or the slide switch.
Power Save Setting
You can set the time to enter Power Save
mode from among [5 minutes. ], [10
minutes.], [30 minutes.], [1 hour], and [Off].
To exit power save, press any button.
The [Power Save] setting can be changed
from the Menu. For more details, refer to
"Menu List" (☞ P.33) and "Learning to Use
the Menu" (☞ P.35).
Power Save
5 minutes
10 minutes
30 minutes
1 hour
Off
BACK EXIT