Setting The Author Id And Worktype - Olympus DS-9500 Instructions Manual

Setting the Author ID and Worktype

Every file recorded on the recorder will include
the Author ID and Worktype as part of its header
information. To create multiple Author IDs and
Worktypes on the recorder, use the bundled ODMS
software to create and upload a data list (list of
Author IDs and Worktypes) to the recorder. For more
details, refer to the online help for ODMS software
(☞ P.46).
By default the Author ID is set to "DS9500" or
"DS9000".
3
Setting an Author ID
1 Turn ON the recorder.
• When [Prompt for author ID at Power-
on.] has been set through ODMS software
(☞ P.46), the registered Author ID list will
appear.
2 Press the + or – button to select the
Author ID that you want to assign to the
recorder from the ID list.
3 Press the OK/MENU button to set the
ID.
• When more than one Author ID exists/ is
registered on the recorder, the ID list will be
displayed.
NOTE
• Up to 10 Author ID entries can be registered (up
to a maximum of 16 characters).
EN
30
Setting the Worktype
Up to 20 Worktypes can be registered and uploaded
to the recorder using the ODMS software. Each
Worktype can have up to 10 optional items
associated with it. Worktypes and Optional Items
can be used on the recorder to populate the file
header information. Refer to the ODMS software
online help (☞ P.50) for registering/setting up
Optional Items through the ODMS software.
The Worktype information of the recorded or
uploaded files can be edited with the menu settings
of the recorder (☞ P.42).
1 While the recorder is in stop mode,
press the NEW button.
• When [Prompt for Worktype ID on new
recordings.] has been set through ODMS
software (☞ P.46), the Worktypes uploaded
to the recorder will appear in a list.
Press the + or – button to select a
2
Worktype from the Worktype list.
Press the OK/MENU button to set the
3
Worktype.
• The selected Worktype and a maximum of
20 Optional Items associated to it can be
recorded as file header information.
• It is possible to add an extra Value to the
Optional Items list of the selected Worktype.
In order to do so, go to the Worktype
information screen (☞ P.42). For more
details, refer to the online help for ODMS
software (☞ P.50).