Power Supply; Inserting The Battery - Olympus WS-812 Detailed Instructions

Power supply

Inserting the battery

This recorder can be used with either a
Ni-MH rechargeable battery or AAA alkaline
battery.
For WS-813, WS-812:
1
• When charging the recorder, make
sure that the supplied Ni-MH
rechargeable battery (BR404) is in
place.
• The supplied rechargeable battery
is not fully charged. Before using
the recorder or after long periods of
disuse, it is recommended that you
continuously charge the battery until
full ( P.16).
For WS-811:
This recorder cannot charge the
rechargeable battery.
Lightly press down on the arrow
1
and slide the battery cover open.
EN
14
Insert the battery, observing the
2
= and - polarities.
Close the battery cover completely
3
by pressing down at A , then
sliding the cover towards B .
Notes
• A manganese battery cannot be used in
this recorder.
• When the battery is changed, a AAA
alkaline battery or Olympus Ni-MH
rechargeable battery is recommended.
• Be sure to stop the recorder before
replacing the battery. Unloading the
battery while the recorder is in use may
cause a malfunction resulting in the
corruption of the file, etc. If you take out
the battery during recording, you will
lose your currently recorded file because
the file header will not be able to close.