If An Error Code Is Displayed - Olympus EVOLT E-500 Advanced Manual

If an error code is displayed

If an error code is displayed during direct printing setting or printing, see the
following table.
For more details on solutions, refer to the printer's instruction manual.
If other codes are displayed, refer to "Error codes" (P. 168).
Monitor indication
NO CONNECTION
NO PAPER
NO INK
JAMMED
SETTINGS CHANGED
PRINT ERROR
CANNOT PRINT
Possible cause
The camera is not
connected to the printer
correctly.
There is no paper in the
printer.
The printer has run out
of ink.
The paper is jammed.
The printer's paper
cassette has been
removed or the printer
has been manipulated
while making settings
on the camera.
There is a problem with
the printer and/or
camera.
Pictures recorded on
other cameras may not
be printed on this
camera.
Direct printing (PictBridge)
Corrective action
Disconnect the camera
and connect it again
correctly.
Load some paper in the
printer.
Replace the ink cartridge
in the printer.
Remove the jammed
paper.
Do not manipulate the
printer while making
settings on the camera.
Turn off camera and
printer. Check the printer
and remedy any problems
before turning the power
on again.
Use a personal computer
to print.
9
151