Noise Reduction - Olympus EVOLT E-500 Advanced Manual

Noise reduction

This function reduces the noise that is generated during long exposures.
When shooting night scenes, shutter speeds are slower and noise tends to
appear in images. When [NOISE REDUCTION] is set to [ON], the camera
automatically reduces noise to produce clearer images. However, shooting
time is approximately twice as long as usual.
For more information about noise generated in images during long exposures,
refer to P. 46.
1
Menu [ ] [NOISE REDUCTION]
[ON]
2
Press the i button.
3
Take the picture.
• The noise-reduction process is activated after
shooting.
• The card access lamp blinks during the noise-
reduction process. You cannot take more
pictures until the card access lamp goes out.
• [busy] is displayed on the viewfinder while noise
reduction is operating.
• When the
• When [NOISE REDUCTION] is set to [ON], sequential shooting is not available.
• This function may not work effectively with some shooting conditions or subjects.
OFF
Notes
mode is set to (, [NOISE REDUCTION] is fixed to [ON].
ON
95
6