If An Error Code Is Displayed - Olympus C-765 Ultra Zoom Quick Start Manual

If an error code is displayed

If an error code appears on the camera's monitor during direct print setting or
printing, see the following table.
For more details, refer to the printer's instruction manual.
Monitor indication
NO CONNECTION
NO PAPER
NO INK
JAMMED
SETTINGS CHANGED
PRINT ERROR
TIPS
• If an error code other than those shown above is displayed, refer to
"Error codes" (P.186).
Possible cause
The camera is not
connected to the printer
correctly.
There is no paper in the
printer.
The printer has run out of
ink.
The paper is jammed.
The printer's paper
cassette has been
removed or the printer
has been manipulated
while making settings on
the camera.
There is a problem with
the printer and/or
camera.
Corrective action
Disconnect the camera
and connect it again
correctly.
Load some paper in the
printer.
Replace the ink cartridge
in the printer.
Remove the jammed
paper.
Do not manipulate the
printer while making
settings on the camera.
Turn off camera and
printer. Check the printer
and remedy any problems
before turning the power
on again.
10
185