Connecting the camera to a computer
Connect the camera to your computer with the provided USB cable.
1
Insert the marked end of the
provided USB cable into the USB
port on your computer.
• The location of the USB port varies
depending on the computer. For details,
refer to your computer's manual.
2
Insert the provided USB cable into
the multi-connector.
3
Set the camera's power switch to
ON.
• The selection screen for the USB
connection is displayed.
4
Use ac to select [STORAGE].
Press the i button.
Look for this mark.
USB port
Multi-connector
Terminal
Smaller
terminal
USB cable
Power switch
10
159