Ae Bracketing - Olympus EVOLT E-500 Advanced Manual

AE bracketing

The camera automatically shoots a number of pictures at different exposure
values for each frame. Even in conditions where correct exposure is difficult to
obtain (such as a backlit subject or a scene at dusk), you can pick the picture
you prefer from a selected number of frames with a variety of different
exposure settings (exposure and compensation values). The pictures are
taken in the following order: Picture with optimum exposure, picture adjusted
in - direction, and picture adjusted in + direction.
Example:
When BKT
is set to [3F
1.0EV]
Compensation value: 0.3, 0.7 or 1.0
The exposure compensation values depend on the EV step interval setting that
can be changed in the menu. Exposure compensation value can be adjusted
within a range of ±1.0. g "EV step" (P. 123)
Number of frames : 3
1
Menu [ ] [AE BKT]
2
Use the control dial
[OFF] / [3F 0.3EV] /[3F 0.7EV] / [3F 1.0EV]
3
Press the i button.
4
Start shooting.
Single-frame shooting
Each time the shutter button is pressed
fully, a picture is taken at a different
exposure.
• The setting for the next shot is displayed in
the viewfinder.
Sequential shooting
Hold down the shutter button until the
selected number of frames are taken. The
camera shoots each frame at a different
exposure.
• Releasing the shutter button stops auto
bracketing shooting.
-1.0EV
to set.
±0
AE BKT
3F 0.3EV
3F 0.7EV
3F 1.0EV
CANCEL SELECT
MENU MENU
Viewfinder
+1.0EV
OFF
GO
EV step
83
6