Control panel screen and function settings
Setting on the control panel screen
1
1
Press the i button.
• The cursor on the control panel screen lights.
Control panel screen
2
Use the arrow pad
the function you want to set.
Ex.) When setting white balance
3
Press the i button.
• The direct menu is displayed.
4
Use the control dial
• You can also use the control dial to make settings on the control panel screen
display after completing step 2.
• If you do not operate the control dial within a few seconds ("Button timer" g
P. 136), the control panel screen will be restored and your setting will be
confirmed. Your setting can also be confirmed by pressing the i button.
Control panel operation procedures
This manual shows the control panel
operation procedures (until the direct menu
is displayed) as below.
Ex.) When setting white balance
i
WB i
22
Cursor
to move the cursor to
to set.
4
1, 3
2
Direct menu