Button Function; My Mode Setting - Olympus EVOLT E-500 Advanced Manual

V button function
This lets you replace the function assigned to the V (one-touch WB) button
by registering another function.
1
Menu
2
Use to set.
[V] One-touch white balance button
(factory-default setting)
[TEST PICTURE]
This enables you to check the picture
you have just taken on the monitor
(REC VIEW feature) without having to
record the picture to the card. This is
useful when you want to see how a
picture turned out before saving it.
[MY MODE]
While holding down the V button, you can take pictures using the
camera settings registered in the [MY MODE SETUP]
(g See below).
[PREVIEW]
While holding down the V button, you can use the preview function.
(g P. 47)
3
Press the i button.
8

My Mode setting

You can register 2 different combinations of camera settings and temporarily call
up one of the registered settings while taking pictures. The registered setting can
be used while the V (one-touch WB) button is being pressed.
1
Menu
2
Use to set.
[MY MODE1] / [MY MODE2]
• If menu settings have already been
registered, [SET] is displayed next to the
corresponding reset option.
3
Use to select [SET].
• The current setting is displayed on the monitor.
Clearing already registered settings
Use to select [RESET].
• Registered settings are canceled.
4
Press the i button.
128
[ ] [V FUNCTION]
[ ] [MY MODE SETUP]