At A Glance - Samsung SNV-L6013R User Manual

overview

AT A GLAnCe

Appearance
<SNV-L6013R>
Item
PoE Connector
Connects to the network and supplies power through Ethernet cable.
a
SNV-L6013R
Audio In Jack
b
SNV-L6014RM
Dome Cover
Dome cover for the lens and unit protection.
c
M12 Female connector
Connect to the M12 Male connector cable for power supply and network connections.
d
cable
Audio Out Jack
Used to connect to speakers. (green)
e
Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have applied ethanol.
`
M
8_ overview
a
b
c
<SNV-L6014RM>
Description
Used to connect to a microphone. (black)
Used to connect to a microphone. (pink)
inside
d
e
b
c
Item
Lens Cover
a
Fixing Hole
b
Reset Button
c
Microphone hole
d
Micro SD Memory Card
e
Compartment
IR LED
f
Illumination Sensor
g
g
f
e
Description
Used for protecting and fixing the lens.
Hole used for securing the camera on a ceiling.
Resets the camera settings to the default. Press and hold for about 5 seconds to reboot the
system.
If you reset the camera, the network settings will be adjusted so that DHCP can be
J
enabled. If there is no DHCP server in the network, you must run the IP Installer
program to change the basic network settings such as IP address, Subnet mask,
Gateway, etc., before you can connect to the network.
A microphone is embedded.
It is applicable only to the SNV-L6014RM model.
`
Compartment for the Micro SD memory card.
These infrared LED's are controlled by the illumination sensor.
Detects incoming light to control the IR LED.
a
b
c
d