Network Setup - Samsung SNV-L6013R User Manual

setup screen
To Setup Special
1. Select <Special>.
2. Select each item and set it properly.
• Sharpness : Adjust the overall sharpness of the image.
If selecting <on>, you can adjust the sharpness of the
image.
• Sharpness level : The higher the level is, the sharper and clearer the outline of the image becomes.
• Gamma : Adjust the contrast of the image.
• Color level : Adjust the strength of video color.
• LDC : To determine whether or not to use the image distortion correction.
• LDC Level : To adjust the level of the distortion correction factor.
To Set oSD
1. Select <oSD>.
2. Select each item and set it properly.
• Camera title : It specifies the name of the camera to be
displayed on the screen.
• Camera title X, Y : It specifies the position of the camera
name on the screen.
• Date & time : Set the time display and date formats on the screen.
• Date & Time X, Y : Specify the position of time display on the screen.
• Weekday overlay : Specify the use of date display date on the screen.
A position-adjustable item (Camera title, Date & Time) may not be displayed normally if it overlaps with another fixed OSD
`
J
item.
To Set ir
1. Select <ir>.
2. Select each item and set it properly.
• Mode : When the IR indicator turns on in B/W mode, the
screen will be protected from saturation on the center area so that you can identify a short-distant
object.
- Off : IR mode will be disabled.
- Auto : Adjust the IR brightness according to the brightness of the object on the center screen.
34_ setup screen

neTworK SeTup

DDnS
DDNS is an abbreviation of Dynamic Domain Name Service that converts the IP address of a camera into a
general Host Name so that the user can easily remember it.
You can use the DDNS service only if the internet is connected.
`
J
1. From the Setup menu, select the <network (
2. Click <DDnS>.
3. Select the <DDnS> connection type.
4. Type in the DDNS items according to the selected type.
• Samsung DDNS : Select this if you use the DDNS server
provided by Samsung.
- Product ID : Enter the product ID that is registered with
the Samsung DDNS service.
- Quick connect : It sets port forwarding automatically
when used with a UPnP (Universal Plug and Play)
supporting router.
If you want to use the DDNS service without using a hub that supports the UPnP function, click Quick connect, then
`
M
go to the hub menu and activate port forwarding for your hub.
For more on how to set port forwarding for your hub, refer to "Port Range Forward (Port Mapping) Setup". (page
18)
• Public DDNS : Select one of provided public DDNS servers when you use a public DDNS server.
- Service : Select desired public DDNS service server.
- Host name : Enter the name of the host that is registered with the DDNS server.
- User name : Enter the user name for the DDNS service.
- Password : Enter the password for the DDNS service.
5. When done, click [Apply ( )].
If selected <Quick connect>, be sure to select Samsung DDNS service.
`
J
)> tab.