registering with DDnS
To register your product with the Samsung DDnS
1. Visit the iPOLiS web site (www.samsungipolis.com) and sign
in with a registered account.
2. From the top menu bar, select <DDnS ServiCe> - <my
DDnS>.
3. Click [proDuCT reGiSTrATion].
4. Enter the product ID.
You must perform the duplicate check for the ID that you entered.
`
5. Select a <CLASSifiCATion> and specify the <moDeL
numBer>.
6. Specify the product location with a description if necessary.
7. Click [reGiSTrATion].
The product will be added to the product list that you can
check.
To connect to the Samsung DDnS in camera setup
1. From the DDNS setup page, set <DDnS> to <Samsung
DDnS>.
2. Provide the <product iD> that you registered product ID with
the DDNS site.
3. Click [Apply (
)].
When the connection is successfully made, you will see the
message of <(Success)> on the screen.
Configuring public DDnS in Camera Settings
1. Open the DDNS settings page and select <public DDnS> for <DDnS>.
2. Enter the corresponding site's host name, user name and password.
3. Click [Apply (
)] button.
If the connection properly establishes, <(Success)> appears.
4. When done, click [Apply (
)].
To use DDNS service properly, both DDNS setup and the router's port forwarding setup are required.
`
M
For port forwarding setup, refer to "Port Range Forward (Port Mapping) Setup". (page 18)
ip filtering
You can create a list of IPs that you want to grant or deny access to them.
1. From the Setup menu, select the <network (
2. Click <ip filtering>.
3. Select <filtering type>.
• Deny : If selecting this, access from those IPs that are
added to the filtering will be restricted.
• Allow : If selecting this, access from only those IPs that are
added to the filtering will be accepted.
4. Click the [Add (
)] button.
The IP list will be created.
5. Provide the IP that you want to grant or deny access from.
When you enter an IP address and a Prefix, the list of IP addresses available will appear in the right-side
filter range column.
)> tab.
English _35