Move Cis Unit To Transportation Position (Function Code: 06); Adf Performance Test (Function Code: 08); Move Cis Unit To Transportation Position; Adf Performance Test - Brother DCP-1510 Service Manual

1.3.3 Move CIS unit to transportation position (function code: 06)

<Function>
This function is used to move the CIS unit of the document scanner unit to the transportation
position (left end) immediately before packing and shipping the machine after repair and
operation checks.
Note:
• Please instruct end users to use this function wherever possible before packing and
shipping their machine to a sales agent or a service dealer for repair.
(For the procedure for end users to operate the maintenance mode, refer to
Method of entering end-user accessible maintenance mode" in this
<Operating Procedure>
(1) Ten-key pad models
Press the [0] and [6] buttons in this order in the initial state of maintenance mode.
Non-ten-key pad models
Press the [
[OK] button.
(2) "MAINTENANCE 06" is displayed on the LCD, and the CIS unit moves to the transportation
position. When moving is completed, "SCAN LOCKED" is displayed on the LCD.
(3) When the [Stop/Exit] button is pressed, the machine returns to the initial state of
maintenance mode.
In the event that the CIS unit was unable to move to the transportation position or this
function code was executed while a scanning error was current, an error occurs and
"SCAN LOCK ERROR" is displayed on the LCD.

1.3.4 ADF performance test (function code: 08)

<Function>
This function is used to test the performance of the automatic document feeder (ADF). The
scanned pages of documents fed by the ADF are counted and the result is displayed on the
LCD.
<Operating Procedure>
(1) Set the documents in the ADF unit. "DOC. READY" is displayed on the LCD.
(2) Ten-key pad models
Press the [0] and [8] buttons in this order in the initial state of maintenance mode.
Non-ten-key pad models
Press the [
[OK] button.
(3) "ADF CHECK P.**" is displayed on the LCD, and the documents are ejected while the
scanned pages are counted.
(** indicates the current count of the scanned pages.)
(4) When the [Stop/Exit] button is pressed, the machine returns to the initial state of
maintenance mode.
Note:
• "NO DOCUMENT" is displayed on the LCD and the machine returns to the ready
state of maintenance mode when the document is not set in the ADF unit.
] or [ ] button to display "MAINTENANCE 06" on the LCD and press the
] or [ ] button to display "MAINTENANCE 08" on the LCD and press the
4-8
"1.1.1
chapter.)
Confidential