Erasing Pictures (One-Frame Erase) - Olympus Camedia C-3040Zoom Instructions Manual

Erasing pictures (One-frame erase)

You can use this function to erase unwanted images. The same procedure
can also be used to erase movies. Before you erase a picture or movie, check
that there is no write-protect sticker on the card or protection setting (P.144)
on the image you want to erase. To erase all the images on a card, see
"Erasing all images (all-frame erase)" on P.155.
1
Use the Arrow pad to dis-
play the picture you want
to erase.
Immediately after you set the
Mode dial to "
picture you shot is displayed.
2
Press the
A confirmation screen appears
asking whether you want to
erase the picture.
3
Use or
Arrow pad to select "YES".
To cancel, select "NO" and
press the [OK] button or the
(Erase) button.
4
Press the [OK] button to
erase the displayed picture.
* You can also erase single
frames in Index playback
mode (P.140) and Close-up
playback mode (P.142).
Take great care never to open the card cover, eject the card, remove the
batteries or unplug the AC adapter while a picture is being erased. This
could destroy the data stored on the card.
Checking and erasing photographed images
", the last
(Erase) button.
on the
1 3
2
4
Monitor
YES
NO
OK
YES NO
71
2