Mode Setup - Using Function Settings For Easy Camera Operation - Olympus Camedia C-3040Zoom Instructions Manual

MODE SETUP - Using function settings for easy camera operation

To make the camera even easier to use, you can use the mode setup option
to customize various camera functions. The functions you can customize
include basic camera operations such as adjusting the monitor brightness,
selecting the units of length displayed in the screens, and selecting the
camera's operating beep tones.
1
Press the
The Menu screen appears.
2
Press
pad to select "MODE SETUP"
and then press
"SETUP".
3
Press the [OK] button.
The MODE SETUP screen appears.
4
Press
desired setting and then
press
Either the current setting or
8
"SETUP" will appear on the screen.
Use the appropriate procedure for
the setting you want to customize.
You cannot take pictures while the
MODE SETUP screen is displayed.
This screen shows the still
shooting MODE SETUP menu.
ALL RESET ON
+ RED
WB
• • • • • •
-
SHARPNESS NORMAL
NORMAL
CONTRAST
[
1 / 4
Example: When "ALL RESET" is selected
Always return to the Menu screen from the MODE SETUP screen by press-
ing the [OK] button. If you use the
screen, the settings are not saved.
172
(Menu) button.
or on the Arrow
to select
or to select the
.
BLUE
]
ALL RESET
+
WB
-
SHARPNESS
CONTRAST
[
1 / 4
3
P
CARD
SETUP
MODE
SETUP
A/S/M
MODE
AE LOCK
(This screen shows the still picture
OFF
ON
CUSTOM
]
Example: When "SQ1" is selected
(Menu) button to return to the Menu
2 4
F2.0 1/800 0.0
SETUP
3 / 3
[ ]
shooting menu.)
TIFF
SQ1 SETUP
SQ2
FLASH
[ 2 / 4 ]
1