Olympus Camedia C-3040Zoom Instructions Manual page 202

Connecting to a computer using the communication cable
Connection pr
Connection pr
CAMEDIA Master must be installed on your computer before you connect
the camera to the computer. Refer to the CAMEDIA Master online manual
for information on installing CAMEDIA Master.
1
Check that the computer and camera are both switched off.
2
Plug the special serial cable into the port labeled "COM1",
"COM2", etc on the computer.
- On IBM PC-compatibles, connect the cable to the D-sub 9-pin serial
port.
IBM PC-compatibles
9
- On Macintosh machines, plug the Macintosh conversion cable into
the printer or modem port on the Macintosh and then plug the serial
cable into the conversion cable.
Macintosh
202
ocedure
ocedure
To D-SUB 9-pin serial port
To printer or modem port
Macintosh conversion
cable
IBM PC serial cable
To camera's serial connector
(RS-232C)
IBM PC serial cable
To camera's serial connector
(RS-232C)